Refinishing Or Resurfacing The Flooring?

wood flooring store in SFV

Refinishing Or Resurfacing The Flooring?

Damaged Hardwood Flooring? Refinishing Or Resurfacing The Flooring?

Many of the old houses built with wooden floors are now crumbling. If this happens on wood floors, you may wonder if the solution is to rebuild the entire floor or refinish the wood since resurfacing treatment and refinishing are used interchangeably. But their meaning is slightly different. Refer to the following articles to learn more about the basics of each process and how they differ.

What is hardwood floor refinishing?

Wood floor refinishing Malibu essentially means renovation. Floor polishing includes:

  • Remove varnishes, seals, and stains from floors
  • Sand the top layer of the floor to reveal the exposed wood and its natural grain
  • Apply a new stain or varnish
  • Apply a new layer of sealant

Since it is a somewhat superficial task, “finishing” can be done on many different types of flooring, such as tile and laminate, but the exact process depends on the surface. If you have a natural wood veneer covering a synthetic core, you can finish it 2-3 times (depending on the thickness of the veneer) before exposing the core.

What is resurfacing wood floors?

Resurfacing includes all of the above but much more. If painting is a cosmetic task, painting is structural. Works where there is actual damage to wood, planks, and/or fasteners (screws).

Resurfacing hardwood floors means repairing them. Remove and replace baseboards, sand the baseboards flat, and reinforce the floor with new screws. When everything is finished, the floor can be finished.

DIY or Pro use?

Depending on the floor area, the finishing process may take several days. It may take several weeks for the surface to appear.

That’s if a word expert does it. Trying to do it yourself will take more time. Finishing is not beyond the scope of the do-it-yourselfer. It’s messy and smelly work, but for the most part, you need an orbital sander. Unless you are an experienced carpenter, you are not recommended to retile yourself. You will need a full set of tools, including a chainsaw, sander, and nail gun.

Conclusions

If the floor only has scratches and scuffs, it is better to refinish it than to refinish it. This restores the original shine and is less invasive. Refinishing is the process of removing only the top layer of existing flooring (including the finish) and replacing it with a new layer rather than removing the old floor completely.

But if the floor is in very bad condition, it is recommended to rebuild or resurface it instead. It is expensive and time-consuming, but it actually creates a completely new surface.

Whichever method you choose, don’t let your floor sit for too long without proper maintenance. The longer you wait to restore the floor, the more expensive it will be to make it look like new. Rely on a professional wood flooring store in SFV to get the help of hardwood flooring experts for wooden flooring repair and refurnishing, and resurfacing needs.

Rancho-Palos-Verdes-Refinishing-Staining-Walnut-Floors

Do You Want A Wooden Floor And Don’t Know Where To Start?

In general, the choice of a wooden floor is made on the grounds of aesthetic criteria (color, grain, treatments) and the type of use envisaged for the floor itself. Before choosing the color, however, it is advisable to think about where the floor will be laid and how it will fit into the environment.

It should not be forgotten that the humidity and temperature of the environment greatly affect the stability of the wood, i.e., the perfect seal in various climatic/environmental conditions; for these reasons, it is often advisable to choose woods with good stability and medium hardness. You can buy high-quality hardwood floors at the best price from Hardwood Flooring Wholesale Los Angeles showroom.

Why choose a wooden floor

  • Good thermal insulation
  • Good acoustic insulation
  • Wear resistance
  • Cost-effectiveness:
  • Ease of maintenance:

Traditional hardwood floor and predefined hardwood floor: the differences

“Traditional hardwood floor” or “solid wood” is a floor made from various elements all of the same wood species. Usually, it varies from 10 to 22 mm in thickness, all in essence.

The “prefinished hardwood floor” is instead composed of two or more layers of different wood; Fir and Birch are the ones that are the most popular. The top layer (the walkable face) of the “prefinished hardwood floor” must not be less than 2.5 mm thick.

Multilayer or predefined hardwood floor: characteristics and composition

It is a series of wooden layers that undergo various processes from calibration to sanding, passing from the processing on the sides to obtain the tongue and groove joint up to the varnishing.

It is composed of an upper layer known as the “noble layer,” which is the walkable face of the “multilayer hardwood floor,” while the underlying layers have the task of keeping the floor stable by contrasting its natural reaction to environmental conditions. These characteristics make the “prefinished hardwood floor” or “multilayer” ideal for quality and durability over time and extremely easy and quick to assemble.

Can hardwood floors be laid on a heated floor?

Of course: the important thing is to take some precautions.

The heating must be turned off at least 5/6 days before laying the floor, and the surface temperature of the screed at the time of lying must be around 15/20°C with a maximum ambient humidity of 65%.

The humidity of the hardwood floor must be carefully checked before lying to verify that it does not exceed the maximum permitted values. When laying floating floors, the thermal resistance of the soundproofing layer (approximately 2.5 mm thick) to be placed under the floor must be considered.

When lying with glues, it is advisable to put the heating on for a few days before starting to smooth the hardwood floor; this is in order to allow the floor to settle before grouting. Do all this seems like a hassle to you, it is better to rely on a professional Hardwood Flooring Showroom for sale and installation of hardwood floors by experts.

Studio-city-restoration-old-oak-floors

How Much Does It Cost To Finish Hardwood Floors

How Much Does It Cost To Finish Hardwood Floors (cover and screen)?

Is your hardwood floor full of scratches, and its finishing has vanished? It’s time to go for Hardwood Floor Refinishing Los Angeles. But how much will it cost to refinish your old hardwood floor? Keep reading this article to explore the cost, as it varies based on various variables.

Cost to screen and finish hardwood floor: per square foot.

When to screen and coat hardwood: This method is ideal when only the polyurethane protecting the floor has been defaced, but the underlying wood is in good condition. Professionals recommend recoating the floor once every three years or as often as needed to protect the wood from damage and delay the need for refinishing.

How to screen and panel hardwood: The room is cleaned before being screened using a mechanical swab (most common) or by hand. After you’ve vacuumed the floor, you’ll need to fix it. This allows you to remove dust with a microfibre cloth. The final step in screening and paneling hardwood is to apply a coat of polyurethane.

Cost To Sand And Finish Hardwood Floors

Refinishing your hardwood floor involves removing the top layer of damaged wood and applying a new finish.

  • Professional cost to refinish hardwood floors: – per square foot.
  • Hardwood refinishing is possible when scratches, dents, or stains have caused damage to the wood. This applies to all types of wood, not just polyurethane sealants.
  • How to refinish hardwood: Polyurethane and enough wood are sanded to remove light damage. Wood filler can be used to repair or replace severely scratched wooden planks. Vacuum the floor and then fix it. If you wish to alter the color of the wood, the first coat can be a combination stain/polyurethane product. Combination products like oil-based Minwax PolyShades and water-based Cabot Polystain are good choices.

Are you looking for a high-quality, durable floor finish? Rely on professional Hardwood Floor Refinishers Los Angeles.

Flooring Contractors Los Angeles

5 Tips For Choosing The Flooring For Your Home

Choosing the right floor can turn into a real challenge, especially if you don’t start off on the right foot and, more precisely, with the right awareness! Precisely for this reason, today, this blog offers you a small handbook divided into five simple but very useful tips. Let’s get started now!

  1. The first step? Evaluate needs and preferences

Having clear ideas is important in any situation, even when it comes to selecting suitable flooring for your property. Therefore, before starting your search, make a list of needs and preferences

  • What materials and colors do you prefer?
  • Which room or rooms is the floor for?
  • Do you have any particular flooring needs or preferences (e.g., do you want a spatula effect or a non-slip surface)?

Answering these questions can help you understand what you want and, above all, communicate well with the professional who will be chosen to carry out the work. He, too, will be able to better understand what to do to meet specific needs, as well as understand which solutions to propose.

  1. The style of furniture you choose is an excellent guide

To choose the ideal floor, it is useful to follow the style of the chosen furniture or, in any case, the one you are going to select. Imagining the new flooring alongside the furnishings will help you make the right choice. When possible, combining a floor tile or plank with furniture can be an excellent idea. If you have decided to get hardwood floors installed in your home, rely on Hardwood Floor Companies in California.

  1. Continuity is the watchword

It is clear that the best solution is always to create continuity with all the annexed rooms. Therefore, if it were not possible to have all the floors the same within the same building, it would be advisable to look for a type of floor similar to the one already present. Continuity evokes a sense of order and gives a unique character to the rooms. In terms of design, this is definitely the right path to take.

  1. Before choosing, you need to pay due attention to the details

To choose the right floor, don’t forget to carefully evaluate the product’s technical specifications. Is it lasting? Is it quality? Is it a resistant material? A little analysis is always necessary before making a definitive purchase. 

  1. The right floor in the right place!

Finally, as the last suggestion not to be underestimated, we tell you this: each flooring has its own peculiarities and can be more or less suitable for a given context. Therefore, before buying, it will be necessary to make sure that the selected floor is the right one for the environment in which it will be installed. To be clear, in outdoor environments, very resistant materials may be needed and perhaps equipped with certain treatments based on the specific location.

Likewise, a water-repellent and anything but a delicate surface will be needed in the kitchen and in the bathroom. These features will make it easier to clean the rooms and increase the durability of the floor itself. To avoid mistakes in this sense, it may be useful to choose the ideal floor using the support and suggestions of professional Flooring Contractors Los Angeles